İçeriğe geç
3 ürüne %10 indirim — sepette otomatikKargo fiyata dahil — tüm TürkiyeSiparişe özel üretim — 2–4 iş günü içinde kargodaHavale/EFT ya da kartla ödeme
FORMVIVA
0
Oyuncak Çay Takımı - Demlik, Çay Bardağı ve Tabak
Oyuncak Çay Takımı - Demlik, Çay Bardağı ve Tabak
Oyuncak Çay Takımı - Demlik, Çay Bardağı ve Tabak
Oyuncak Çay Takımı - Demlik, Çay Bardağı ve Tabak
1 / 4
Oyuncak & Oyun

Oyuncak Çay Takımı - Demlik, Çay Bardağı ve Tabak

209 ₺ Kargo dahil

Oyun için bir çay takımı: kapaklı bir demlik ile tabaklı, kulplu, ince belli bir çay bardağı. Demliğin kapağı ağzına oturur ve demlik eğildiğinde düşmez; tabaktaki sığ yuva bardağın kaymasını önler. Bu bir oyuncaktır; sıcak sıvı ya da içilecek bir şey koymak için uygun değildir.

3 ürüne %10 indirim — sepette otomatik uygulanır.
Seçenek Çay bardağı ve tabağı
Renk Fotoğraftaki renkler (çok renkli)
Bu ürün hakkında soru sor
  • Siparişe özel üretim2–4 iş günü içinde kargoda
  • Kargo fiyata dahilTürkiye'nin her yerine
  • 14 gün iadeKoşulsuz cayma hakkı
  • Güvenli ödemeHavale/EFT ya da kart
Ürün bilgileri
  • Demlik: 130,4 × 82,0 × 71,9 mm; kapak 49,1 mm çap
  • Bardak: 48,5 × 53,4 × 65,0 mm; tabak 98,2 mm çap
  • Sıcak sıvı ve içecek için uygun değildir
  • Ağırlık: 52 g
  • FDM 3D baskı · PLA ya da PETG
Üretim ve teslimat

Ürününüz ödeme onayından sonra atölyemizde basılır, temizlenir ve kontrol edilir; 2–4 iş günü içinde kargoya verilir. Kargo ücreti fiyata dahildir. 3D baskı yüzeyinde ince katman çizgileri görülmesi doğaldır.

İade ve değişim

Teslimden itibaren 14 gün içinde iade edebilirsiniz. Hasarlı gelen ürünü ücretsiz yeniden basıp göndeririz. Ayrıntılar

Tasarım notları (İngilizce)

A play tea set in two parts you can print separately: the teapot with its lid, and the tea glass with its saucer.

Teapot: 130.4 x 82.0 x 71.9 mm, with a lid 49.1 mm across that drops into the rim and stays put when the pot is tipped.

Glass and saucer: the glass is the tulip shape with a handle, 48.5 x 53.4 x 65.0 mm. The saucer is 98.2 mm across with a shallow recess so the glass does not slide off.

The two are sized to each other, so the pot looks right next to the glass when the whole set is on the table.

This is a toy. Nothing here is meant to hold hot liquid or anything you would drink.

PRINTING

Material: PLA.

Layer height: 0.20 mm for the teapot, 0.16 mm for the glass and saucer.

Walls: 2.

Infill: 15%.

Print the lid in a colour that stands apart from the pot - white against red reads well in the photos.

Wash by hand in warm water. Keep it out of the dishwasher.

Bu tasarımı siz de satmak ister misiniz?

Ticari lisansla baskılarını kendi işletmenizde satabilirsiniz; adınıza PDF lisans belgesi. Ayrıntılar

Aynı kategoriden

Bunlar da ilginizi çekebilir

Tümü
209 ₺kargo dahil